Industrial Hygiene & Environmental Engineering
The goal of industrial hygiene and environmental engineering division is to anticipate occupational or environmental health risks for each phase of any construction project from initial planning through its future maintenance. We educate our colleagues and clients on public standards and regulations ensuring that the environmental liability protection of all parties is achieved with properly implemented testing and remediation plans.
The bottom line: Our Industrial Hygiene/Environmental Engineering services will help reduce liability impacts for our clients prior to, during, and after construction by integrating scientific methodology towards preventative solutions.
INDUSTRIAL HYGIENE (IH)
- Asbestos Inspection and Abatement Management
- Lead-Based Paint Inspections and Risk Assessments
- Biological Services
- Occupational/Environmental Health Assessments
- Risk Assessment Services
- Ventilation
- Indoor Air Quality
- LEED Indoor Environmental Quality Verification Sampling
-Mold Sampling and Building Science
- Expert Witness
- Noise/Acoustical Commissioning
- Radiation Sampling and Testing
- Project Management
-OSHA Program Development
- Training
Montana Department of Environmental Quality Asbestos Control Program
-Asbestos Inspector Initial Course *24 hours
-Asbestos Inspector Refresher Course * 4 hours
-Asbestos Contractor/Supervisor Initial
Course * 40 hours
-Asbestos Contractor/Supervisor
Refresher Course * 8 hours
Occupational Safety and Health Training
-Hazardous Waste Emergency Response Training (HAZWOPER) Initial: 40-hour
-HAZWOPER Initial: 24-hour
-HAZWOPER Annual Refresher: 8-hour
-Additional Health and Safety
Training: As Requested
ENVIRONMENTAL (ENV)
- Phase I, Phase II and Phase III Environmental Site Assessments (ESAs)
- Groundwater Monitoring
- Well Installations
- Fate and Transport Studies
- Vapor Intrusion Assessments
- Air Quality Permitting
- Site Characterization
- Underground Storage Tank (UST) Closure
- Hydrocarbon Release Management
- Stormwater Discharge Planning
- Spill Prevention Control and Countermeasures Plan (SPCC) Development
- Water Quality Sampling
The bottom line: Our Industrial Hygiene/Environmental Engineering services will help reduce liability impacts for our clients prior to, during, and after construction by integrating scientific methodology towards preventative solutions.
INDUSTRIAL HYGIENE (IH)
- Asbestos Inspection and Abatement Management
- Lead-Based Paint Inspections and Risk Assessments
- Biological Services
- Occupational/Environmental Health Assessments
- Risk Assessment Services
- Ventilation
- Indoor Air Quality
- LEED Indoor Environmental Quality Verification Sampling
-Mold Sampling and Building Science
- Expert Witness
- Noise/Acoustical Commissioning
- Radiation Sampling and Testing
- Project Management
-OSHA Program Development
- Training
Montana Department of Environmental Quality Asbestos Control Program
-Asbestos Inspector Initial Course *24 hours
-Asbestos Inspector Refresher Course * 4 hours
-Asbestos Contractor/Supervisor Initial
Course * 40 hours
-Asbestos Contractor/Supervisor
Refresher Course * 8 hours
Occupational Safety and Health Training
-Hazardous Waste Emergency Response Training (HAZWOPER) Initial: 40-hour
-HAZWOPER Initial: 24-hour
-HAZWOPER Annual Refresher: 8-hour
-Additional Health and Safety
Training: As Requested
ENVIRONMENTAL (ENV)
- Phase I, Phase II and Phase III Environmental Site Assessments (ESAs)
- Groundwater Monitoring
- Well Installations
- Fate and Transport Studies
- Vapor Intrusion Assessments
- Air Quality Permitting
- Site Characterization
- Underground Storage Tank (UST) Closure
- Hydrocarbon Release Management
- Stormwater Discharge Planning
- Spill Prevention Control and Countermeasures Plan (SPCC) Development
- Water Quality Sampling
